Quicksilver 875SD User Manual

Quicksilver 875SD — System & Component Overview and Operaon
36
Do NOT test the bow thruster while the boat is out of the
water, unless you are certain that everyone is a safe
distance from the thrust tube.
Never allow the bow thruster to run for longer than 5
seconds with the boat is out of the water.
Bow Thruster Movement
Bow Thruster
Thruster
150A fuse
Baery
Baery switch
VSR
Control panel
If 2 control panels are installed at separate helms, never
operate the bow thruster from both panels simultaneously.
Refer to the bow thruster owner’s manual for exact baery
requirements
12. Steering
Your boat comes equipped with a hydraulic steering system. The basic system for a single engine boat
contains a steering wheel, a hydraulic helm pump, a hydraulic steering cylinder, and hydraulic hoses. If
you purchase a Mercury Verado® six cylinder engine, the steering system includes an electric power
assisted steering pump to aid in the handling of the vessel.
To move the bow to the port direcon push the le buon. To move the bow to the starboard
direcon, push the right buon. To turn o the bow thruster controls, press the on/o switch once.
Refer to the thruster owner’s manual for complete details on the operaon and warranty informaon.

Quicksilver 875SD Specifications

General

Brand	Quicksilver
Model	875SD
Category	Boat
Language	English