Quicksilver 875SD User Manual

Quicksilver 875SD — Electrical Systems
60
Under normal condions, the zincs on the boat should last
at least one year, if not more. If abnormal deterioraon of
the zincs occur, a problem exists within the system, and
should be corrected immediately.
8. Baery Charger
When turned ON, the baery charger automacally increases current output when there is a drop in
baery voltage. All baeries, including the bow thruster baery, are connected to the baery
charger. When the baeries are charged, the unit maintains a small current ow to keep the baeries
fully charged and ready for service without overcharging.
9. Electrical Schemacs
This owner’s manual contains electrical schemacs and wiring harness illustraons for your boat.
These electrical schemacs were generated by the Electrical Engineering Department for technical
reference and service technicians. Quicksilver® does not recommend that you aempt to work on
the boat’s electrical system yourself. Instead, we recommend that you take your boat to your local
authorized Quicksilver® dealer for service. Quicksilver® reserves the right to change or update the
electrical system on any model at any me without noce to the consumer and is not obligated to
make any updates to units built prior to the change.

Quicksilver 875SD Specifications

General

Brand	Quicksilver
Model	875SD
Category	Boat
Language	English