RADWAG R Series User Manual

- 28 -
CURR.RES
Option enables printing out the current measurement result
(NET weight) in a current unit.
GLP printout
CAL.REPORT
Option enables printing out a report from the last adjustment,
according to the settings declared for the adjustment report
printout (see sec. 14.1 of this user manual).
Header
GLP printout
Footer
DASHES
Option enables printing out separating dashes.
Header
Footer
EMPTY LINE
Option enables printing out an empty separating line.
Header
Footer
SIGNATURE
Option enables providing an area for the signature of a user
performing the adjustment.
Footer
PROFILE
Option enables printing out the name of currently selected
Profile.
Header
GLP Printout
Footer
NSTD. PRNT.
Option enables printing out one of 100 non-standard printouts
on the footer printout. The way of entering non-standard
printouts is described further down this user manual.
Header
GLP printout
Footer
For the parameters described above, one of these values must be selected:
NO - do not print
YES - print
Exemplary reports:
Header
GLP printout
Footer
8.3. NON-STANDARD PRINTOUTS
The balance software enables entering 4 non-standard printouts. Each of them can consist of
approximately 160 characters.
Non-standard printout may include:
• variables dependent on the working mode and other needs (mass, date etc.)
• permanent text from the user menu, remember to use capital letters exclusively, no Polish
signs allowed
• Non-standard printout can consist of 160-character long string.

RADWAG R Series Specifications

General

Brand	RADWAG
Model	R Series
Category	Scales
Language	English