To Next Page

To Previous Page

- 61 -

F Shortcut Keys

You can declare which particular weighing function is to be launched using F1, F2, F3 or F4 keys.

For procedure informing you how to declare the particular function, read F Shortcut Keys section.

Info field provides the following information:

• N (number of samples),

• Sum (total weight of samples within a series)

• AVG (average value of the series)

• Min (minimum value in a series)

• Max (maximum values in a series)

• DIF (difference between MAX and MIN within the series)

• SDV (standard deviation)

• RDV (variance coefficient)

11.10.1. Means of Operation

• Enter <STATISTICS> mode.

• Place the first load on the weighing pan.

• When the indication is stable, confirm the measurement by pressing button, the

measurement is saved in the balance memory, next it is automatically printed out with the

measurement number.

• Remove the load from the weighing pan

• Carry out measurements for other loads within this series

• When all the measurements are saved, it is possible to check the results of statistics by

pressing

button:

• Select an option <RESULT> by pressing button.

• The information on number of saved measurements is displayed in a bottom line. On pressing

or , the type of displayed information changes.

RADWAG R Series User Manual

Questions and Answers: