8 | Programming mode
Operating instructions 33 / 64
8 Programming mode
You can create and save your own cooking programmes in programming mode. There are 100 programme slots
available. You can assign up to 12 cooking steps to each programme. For you this means it is easy to use, no
checking, no monitoring. You therefore gain time, save raw materials and energy and always have outstanding,
standardised food quality.
8.1 Start programming mode
1. Press the button on the start screen:
2. Press the button
>> The program list in the programming mode will be displayed.
8.2 Pre-defined programme
You can choose from the following preset programmes:
Programme Steps Settings
Container finishing with
time
Step 1
n
Cooking mode: Combination of steam and hot air
n
Preheat: 140 °C
Step 2
n
Cooking cabinet temperature: 140 °C
n
Cooking cabinet humidity: 60 %
n
Fan level: 4
n
Core temperature: 68°C
Step 3
n
Cooking mode: Convection
n
Cooking cabinet temperature: 140 °C
n
Cooking cabinet humidity: 60 %
n
Fan level: 4
n
Core temperature: 72°C
Container finishing with
core temperature
Step 1
n
Cooking mode: Combination of steam and hot air
n
Preheat: 140 °C
To Next Page
Loading...
Need help?
General
