Raymarine C-Series Reference Manual

Chapter 4: Using the Chart 63
The waypoint and its dotted line are removed from the screen and the cursor moves
back to the previous waypoint. If you repeatedly press these keys, successive
waypoints are removed.
Delete a waypoint from the new route list
If you insert a waypoint incorrectly into a route that you are building via the waypoint
list, you can remove it:
To abandon the route build
To cancel the route that you are currently building (on-screen or via the waypoint list):
Saving routes
Once you have built your route either on screen and/or via the waypoint list you have
the option to either:
• Save and immediately follow the built route (Quick Route)
Or:
• Save the built route for later use (and rename it if required).
Quick routes
A route that is saved and immediately followed is referred to as a Quick Route. If a
Quick Route already exists, it is overwritten unless you rename it (see
page 82 ).
To save the built route for later use
o
Note: For further details on editing a dialog box, please refer to page 11
D8356-1
REMOVE
WAYPOINT
Highlight incorrect
waypoint
Remaining waypoints close-up
and renumber accordingly
Make Route
New Route
01 Sandy Bay
02 Crag Rock
03 Rush Creek
Waypoints
Crag Rock
Blyth Bay
Sandy Bay
Make Route
New Route
01 Sandy Bay
02 Rush Creek
Waypoints
Crag Rock
Blyth Bay
Sandy Bay
D8353_1
CANCEL
YES
D8348-1
FOLLOW (QUICK)
ROUTE
Route saved under 'Quick Route'
Follow route commences
D8350_1
SAVE ROUTE...
EDIT NAME EDIT COLOR
To accept default
Save Route
R
ou
te
1
Name
Color
OK
Or:
81221_4.book Page 63 Tuesday, February 28, 2006 5:24 PM

Raymarine C-Series Specifications

General

Brand	Raymarine
Model	C-Series
Category	GPS
Language	English