RCA PRO808A User Manual

Time Counter
The time counter display shows the actual time elapsed when recording or playing back a tape. The time
counter quickly locates the end of recorded segments.
Note the reading when you are finished recording or
playing back a tape. Before you start to record or playback a tape, press the COUNTER RESET button to set
the counter to “0:OO:Oo”.
For example, you recorded a IO-minute segment. Later, you want to locate the end of your recording. Insert
the cassette and fast-forward the tape until the time counter reads “0:10:00”.
COUNTER RESET
COUNTER MEM (Memory)
REW (Rewind)
COUNTER MEM~=~
(Memory)
COUNTER RES
(Reset)
Memory-Stop Feature
The memory stop feature helps you locate a certain
point on the tape during playback. When memory
stop is turned on, the tape will stop automatically
during rewind or fast forward when the time counter
reaches “A4 0:OO:Oo”.
I. Press and hold the small button on POWER while
you place it in PLAY.
2. Press COUNTER MEM (memory) to turn on the
memory stop feature. An “M” appears in front of
the time counter.
Time Counter
M 0:OO:OO
with Memory
T
Stop Feature
Turned on
l7
Seconds
Minutes
Hours
3. Locate the place on the tape you want to return to
and press COUNTER RESET (COUNTER RES on
remote) to set the time counter to “M 0:OO:Oo”.
4. Continue to play the tape. When you want to
return to the place you marked, press STOP.
5. Press REW (rewind). The tape will rewind to the
time counter reading of “M 0:OO:Oo”.
Note: If you rewind the tape farther back than
“O:OO:OV’, a minus will appear in front of the counter.
Tape Remaining Display
The tape remaining display tells you how much
recording time you have left on the tape.
1. Press and hold the small button on POWER while
you place it in CAM. Press the thumb trigger
(START/STOP on remote) to start recording.
2. Press COUNTER MEM to change the time
counter to the tape remaining display. After a few
seconds, arrows appear to indicate the amount of
tape remaining on the cassette in the camcorder.
i$$y==l
1
I
3. After a few seconds the tape remaining display
will switch to the time counter again.
Notes: Once tape remaining has been calculated, it can
be displayed quickly by pressing COUNTER MEh4.
The tape remaining display only operates during
recording.
Ejecting the cassette or placing POWER in OFF or
PLAY cancels tape remaining.
31

RCA PRO808A Specifications

General

Brand	RCA
Model	PRO808A
Category	Camcorder
Language	English