— English Fillcontrol Auto Make-up and degassing — 06.07.2016 - Rev. B
6.3.2 Floor mounting
device is installed on the floor. Select the attachment
means according to the floor properties.
Comply with the following instructions:
The device is installed sufficiently close to the
diaphragm expansion tank.
– You ensure so that the pressure sensor is able to
measure the filling pressure.
The fixtures can be operated.
Ensure sufficient space for installing the connection
lines.
st
" static height is required to determine the minimum operating pressure of the plant system.
To Next Page
Loading...
Need help?
General
