Reflex Fillcontrol Auto Series User Manual

Contr
oller
Fillcontrol Auto Make-up and degassing — 06.07.2016 - Rev. B English —
39
9 Controller
9.1 Operator panel
1 Manual
• For tests and maintenance tasks
• The Manual LED illuminates green in manual mode
8 OK
• Confirm actions
2 Stop
• For commissioning and entry of new values in the
controller
• The Stop LED illuminates green in stop mode
9 Error LED
• The Error LED illuminates in the event of a fault
3 Auto (continuous operation)
• The Auto LED illuminates green in Automatic mode
• The Auto LED flashes green in Manual mode
• The Auto LED is not illuminated when the system is
stopped
10 Pump
• The Pump LED illuminates green during pump
operation
4 Menu
• Call up the Customer menu
11 Pump
• The Pump LED illuminates green during pump
operation
5 "Forward" to the next menu 12 Motor ball valve
• The motor ball valve LED illuminates during
adjustment
6 "Back" to the previous menu 13 Display
• Two lines
7 Quit
• Acknowledge messages
Selecting and changing parameters
1. Use "OK" (8) to select the parameter.
2. Use the arrow buttons (5) or (6) to change the parameter value.
3. Use "OK" (8) to confirm the parameter.
4. Use the arrow buttons (5) or (6) to change the menu option.
5. Use "Quit" (7) to switch to a different menu level.

Reflex Fillcontrol Auto Series Specifications

General

Brand	Reflex
Model	Fillcontrol Auto Series
Category	Service Equipment
Language	English