QXBIUDB*T[G3DJH
MEGANE SCENIC MONOSPACE NU 679-3
C:\Documentum\Checkout\nu679-3_eng_T3.WIN 30/9/2002 17:15
-page29
3.29
REAR SEATS: OPERATION (continued)
To return the seats to their original
position
Lower the seat until it is
approximately 4 inches (10
centimetres) from the floor and
release it.
The seat will position itself
automatically under its own weight.
Checkthatitiscorrectlylockedin
place.
The rear seats can be completely
removed.
To remove the seats
Fold the seats down as explained on
the previous pages.
Lower the two lugs 7 and lift the
seat out.
To refit the seats
Firstly, insert the two front hooks
for the seat into the anchoring
points.
Then lower the seat until
it is approximately 4 inches
(10 centimetres) from the floor and
release it. The seat will position
itself automatically under its own
weight.
Check that it is correctly locked in
place.
When moving the rear
seats, check that there is
nothing obstructing the
anchor points (there
should be no gravel, cloth, toys,
etc.).