QXBIUDB*T[G3DJH
MEGANE SCENIC MONOSPACE NU 679-3
C:\Documentum\Checkout\nu679-3_eng_T1.WIN 25/9/2002 11:12
-page59
1.53
TIME AND EXTERNAL TEMPERATURE
Clock 1
The time and/or external
temperature are displayed when the
ignition is switched on.
Setting the clock
Press the button:
H for hours
M for minutes
For vehicles fitted with the
Carminat system, refer to the
handbook supplied for
information on the special
features of this equipment.
Clock 2
When the ignition is switched on,
display 2 will show OIL OK for
30 seconds followed by the total
mileage (or trip mileage) and the
clock.
External temperature
indicator
This information must
neverbeusedasa
detector for ice. In effect, ice
formation is related to exposure,
local hygrometry and
temperature. The external
temperature alone is not
sufficient to detect ice.
Setting the time
Press multifunction button 3 to
select total mileage recorder and
clock.
Keep the multifunction button
pressed: the two dots in the middle
will flash for 3 seconds and then the
hours will scroll through. The
minutes scroll through the same
way when the same button is
pressed briefly.
If the electrical supply is cut
(battery disconnected, feed wire
broken, etc.), the clock must be
reset.
We advise that these settings are
not made when driving.