Renesas e1 User Manual

E1/E20/E2/E2 Lite Additional Document 1. Overview
R20UT2937EJ0301 Rev.3.01 Page 10 of 45
Jul 1, 2020
1.4 Supported Devices
Table 1-1 Supported Device List
Item
Description
Target MCUs
RL78 Family (RL78-S1 Core) *1
RL78/G1x: RL78/G10, RL78/G1M, RL78/G1N
Notes: 1. For details on the RL78-S1 core, refer to "RL78 Family User's Manual: Software".
2. When using other than the RL78/G10, RL78/G1M, RL78/G1N, refer to "E1/E20/E2 Emulator, E2 Emulator
Lite Additional Document for User's Manual (Notes on Connection of RL78) (R20UT1994)".
Table 1-2 Debugging Function List
Item
Type of the RL78 Core
Description
RL78-S1
Memory reference or change during program execution
Pseudo-real-time RAM monitor
(RRM)
Supported
CPU is used when monitoring
Dynamic Memory Modification
(DMM)
Supported CPU is used when changing
Event
2 points (max)
Can be used for hardware break
Break Software break Not supported
Hardware break
Supported
Execution address
Forced break Supported
Trace
Acquired information
Not supported
Start event Not supported
End event
Not supported
Performance
measurement
function
Measurement item Supported Between start and stop of user program
execution
Performance
Supported
Resolution: 100 μs
Maximum measurement time: 119 hours
18 min
Hot plug-in Not supported
Coverage measurement function
Not supported
Extended
function of the
E2*
Solution for the tuning
of current
consumption
Supported Current consumption by the user system
is measured when the power is supplied
from the E2.
External trigger
input/output
Supported
External triggers can be input to or output
from the E2 expansion interface.
Note: When the low-voltage OCD board is in use, the extended functions of the E2 are not available.

Renesas e1 Specifications

General

Brand	Renesas
Model	e1
Category	Computer Hardware
Language	English