Reproduction Ratio
This section describes the user tools in the Reproduction Ratio menu under Copier / Document Server
Features.
Default settings are shown in bold type.
Shortcut Reduce/Enlarge
You can register up to three frequently used Reduce / Enlarge ratios other than the fixed Reduce /
Enlarge ratio and have them shown on the initial display. You can also change registered Reduce /
Enlarge ratios.
When you select [User Reduce/Enlarge Ratio], the ratio can be set from 25.0 to 400.0%, using the
number keys.
The default setting for "F1" is 71% (Metric version) / 73% (Inch version).
The default setting for "F2" is 141% (Metric version) / 155% (Inch version).
The default setting for "F3" is 93%.
Reproduction Ratio
Specify the enlargement and reduction ratios that appear if [Reduce / Enlarge] is pressed on the
copier screen.
• Metric version
• 25%
• A3 A5, B4 B6 (50%)
• A3 B5, A4 B6 (61%)
• A3 A4, B4 B5 (71%)
• B4 A4, B5 A5 (82%)
• A3 B4, A4 B5 (87%)
• 93%
• B4 A3, B5 A4 (115%)
• A4 B4, A5 B5 (122%)
Reproduction Ratio
107
To Next Page
Loading...
Need help?
General
