System
This section describes the user tools in the System menu under Printer Features.
Default settings are shown in bold type.
Print Error Report
Select this to have an error report printed when a printer or memory error occurs.
The default setting is Off.
Auto Continue
You can select this to enable Auto Continue. When it is On, printing continues after a system error
occurs.
The default setting is Off.
Memory Overflow
Select this to have a memory overflow error report printed.
The default setting is Do not Print.
Job Separation
You can enable Job Separation.
The default setting is Off.
This menu can be selected only when a finisher (optional) is installed.
Rotate by 180 Degrees
Specify whether to rotate the print image 180 degrees relative to the paper orientation.
The default setting is Off.
Auto Delete Temporary Print Jobs
You can select to automatically delete print jobs temporarily stored in the machine.
The default setting is Off.
If you select [On], you can set up to 200 hours for auto file deleting.
Auto Delete Stored Print Jobs
You can select to automatically delete print jobs stored in the machine.
The default setting is On, 3 day(s).
If you select [On], you can set up to 180 days for auto file deleting.
Initial Print Job List
You can set the desired type of print job list that appears on the screen when you press [Print Jobs].
The default setting is Complete List.
• Complete List
System
203
To Next Page
Loading...
Need help?
General
