Scan Settings
This section describes the user tools in the Scan Settings menu under Scanner Features.
Default settings are shown in bold type.
A.C.S. Sensitivity Level
Sets the sensitivity level for judging color/black and white for scanning originals when [Scan Type]
is set to [Auto Color Select].
This menu appears only when the machine has the color scanner function.
The default setting is the middle of 5 adjustment levels.
Wait Time for Next Orig.: Exposure Glass
To divide originals and scan them individually with the exposure glass to form a single file, select
[Continuous Wait], [Off], or [Set Wait Time] for the waiting status.
The default setting is Set Wait Time, 60 second(s).
If you select [SADF] in [Original Feed Type] on the Scan to Folder screen, the [Wait Time for Next
Orig.: Exposure Glass] setting becomes invalid.
If you select [Batch] in [Original Feed Type] on the Scan to Folder screen, the [Wait Time for Next
Orig.: Exposure Glass] setting becomes invalid, and the machine waits for an additional original to
be placed.
If [Set Wait Time] is selected, enter the wait time in seconds (3-999) for placing additional originals
with the number keys. Scanning will start if additional originals are placed and the [Start] key is pressed
within this time. You can end scanning and begin transmission by pressing the [ ] key within this time.
Once the specified time has elapsed, transmission starts automatically.
If [Continuous Wait] is selected, the machine will wait for additional originals until the [ ] key is
pressed. Scanning will start when additional originals are placed and the [Start] key is pressed. You
can end scanning and begin sending by pressing the [ ] key.
If originals are placed in the ADF (auto document feeder), transmission will start without waiting for
additional originals after all originals in the ADF have been scanned, regardless of the specified
settings.
If a paper misfeed occurs or any of the following operations are performed while the machine is
waiting for additional originals, the countdown stops and does not start again until the [ ] key is
pressed.
• Changing the settings such as the scan settings
• Opening the upper cover of the ADF
• Pressing the [Interrupt] key to activate the copy mode
Wait Time for Next Original(s): SADF
When dividing originals and scanning them separately with the ADF to form a single file, select [Set
Wait Time] or [Continuous Wait] for the waiting status.
Scan Settings
215
To Next Page
Loading...
Need help?
General
