Menu User Tool Setting Requirements
Interface Settings/Network Ethernet Speed As required
Interface Settings/Network LAN Type Necessary
Interface Settings/Network Permit SNMPv3 Communication As required
Interface Settings/Network Permit SSL/TLS Communication As required
Interface Settings/Network Host Name As required
Interface Settings/Network Machine Name As required
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
• [LAN Type] is displayed when the wireless LAN board is installed. If Ethernet and wireless LAN are
both connected, the selected interface has priority.
• p.69 "Interface Settings"
Wireless LAN
This section lists the settings required for using the printer or LAN-Fax function with a wireless LAN
connection.
For details about how to specify the settings, see "Interface Settings".
Menu User Tool Setting Requirements
Interface Settings/Network Machine IPv4 Address Necessary
Interface Settings/Network IPv4 Gateway Address As required
Interface Settings/Network Machine IPv6 Address As required
Interface Settings/Network IPv6 Gateway Address As required
Interface Settings/Network
IPv6 Stateless Address
Autoconfiguration
As required
Interface Settings/Network DNS Configuration As required
Interface Settings/Network DDNS Configuration As required
1. Connecting the Machine
24
To Next Page
Loading...
Need help?
General
