Menu User Tool Setting Requirements
Interface Settings/Network Domain Name As required
Interface Settings/Network WINS Configuration As required
Interface Settings/Network Effective Protocol Necessary
Interface Settings/Network NCP Delivery Protocol As required
Interface Settings/Network NW Frame Type As required
Interface Settings/Network SMB Computer Name As required
Interface Settings/Network SMB Work Group As required
Interface Settings/Network LAN Type Necessary
Interface Settings/Network Permit SNMPv3 Communication As required
Interface Settings/Network Permit SSL/TLS Communication As required
Interface Settings/Network Host Name As required
Interface Settings/Network Machine Name As required
Interface Settings/ Wireless LAN Communication Mode Necessary
Interface Settings/ Wireless LAN SSID Setting As required
Interface Settings/ Wireless LAN Ad-hoc Channel As required
Interface Settings/ Wireless LAN Security Method As required
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
• [Wireless LAN] and [LAN Type] are displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN are connected, the selected interface takes precedence.
• p.69 "Interface Settings"
Network Settings Required to Use the Printer/LAN-Fax
25
To Next Page
Loading...
Need help?
General
