You can search by the registered name, fax number, folder name, e-mail address, or IP-Fax
destination.
6. Press [Fax Dest.].
7. Change the settings.
8. Press [OK].
9. Press [Exit].
10. Press the [User Tools/Counter] key.
• To change the name, key display and title, see "Changing a Registered Name".
• p.228 "Changing a Registered Name"
• p.244 "To change the fax number"
• p.244 "To change the line"
• p.245 "To program the SUB Code"
• p.245 "To program the SEP Code"
• p.245 "To set the International TX Mode"
• p.246 "To select the Fax Header"
• p.246 "To set label insertion"
Using a Fax Destination as a sender
This section describes how to use fax destination as a sender.
1. Press [Protection].
2. Press [Sender] under "Use Name as".
To change the fax number
This section describes how to change the fax number.
1. Press [Change] under "Fax Destination".
2. Enter the new fax number using the number keys, and then press [OK].
To change the line
This section describes how to select the line.
7. Registering Addresses and Users for Facsimile/Scanner Functions
244
To Next Page
Loading...
Need help?
General
