• When [Do not Specify] is selected for LDAP Authentication, the User Name and Password that you
have specified in Program / Change LDAP Server of Administrator Tools settings applies. For details,
see "Programming the LDAP server".
1. Press [System Settings].
2. Press [Administrator Tools].
3. Press [Address Book Management].
4. Check that [Program / Change] is selected.
5. Press the name you want to register or enter the registered number using he number keys.
If you press [Search], you can search by the registered name, fax number, folder name, e-mail
address, or IP-Fax destination.
6. Press [Auth. Info], and then press [ Next].
7. Press [Specify Other Auth. Info] under "LDAP Authentication".
8. Press [Change] under "Login User Name".
9. Enter the login user name, and then press [OK].
10. Press [Change] under "Login Password".
11. Enter the password, and then press [OK].
12. Enter the password again to confirm, and then press [OK].
Registering SMTP and LDAP Authentication
293
To Next Page
Loading...
Need help?
General
