EasyManuals Logo
Home>Ricoh>All in One Printer>Aficio MP C2050

Ricoh Aficio MP C2050 User Manual

Ricoh Aficio MP C2050
328 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #55 background imageLoading...
Page #55 background image
Windows Authentication
Specify this authentication when using the Windows domain controller to authenticate users who have their
accounts on the directory server. Users cannot be authenticated if they do not have their accounts in the
directory server. Under Windows authentication, you can specify the access limit for each group registered
in the directory server. The Address Book stored in the directory server can be registered to the machine,
enabling user authentication without first using the machine to register individual settings in the Address
Book. If you can obtain user information, the sender's address (From:) is fixed to prevent unauthorized
access when sending e-mails under the scanner function and forwarding received e-mails.
Windows authentication can be performed using one of two authentication methods: NTLM or Kerberos
authentication. The operational requirements for both methods are listed below.
Operational Requirements for NTLM authentication
To specify NTLM authentication, the following requirements must be met:
• This machine only supports NTLMv1 authentication.
• A domain controller has been set up in a designated domain.
• This function is supported by the operating systems listed below. To obtain user information when
running Active Directory, use LDAP. If SSL is being used, a version of Windows that supports TLS
v1, SSL v2, or SSL v3 is required.
• Windows NT 4.0 Server
• Windows 2000 Server
• Windows Server 2003/Windows Server 2003 R2
• Windows Server 2008
Operational Requirements for Kerberos authentication
To specify Kerberos authentication, the following requirements must be met:
• A domain controller must be set up in a designated domain.
• The operating system must be able to support KDC (Key Distribution Center). To obtain user
information when running Active Directory, use LDAP. If SSL is being used, a version of Windows
that supports TLSv1, SSLv2, or SSLv3 is required. Compatible operating systems are listed below.
• Windows 2000 Server
• Windows Server 2003/Windows Server 2003 R2
• Windows Server 2008
• During Windows Authentication, data registered in the directory server, such as the user's e-mail
address, is automatically registered in the machine. If user information on the server is changed,
information registered in the machine may be overwritten when authentication is performed.
Windows Authentication
53
3

Table of Contents

Other manuals for Ricoh Aficio MP C2050

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh Aficio MP C2050 and is the answer not in the manual?

Ricoh Aficio MP C2050 Specifications

Ricoh Aficio MP C2050

General Specifications IconGeneral Specifications
output speed20 ppm BW & Full-Color
warm-up time25 seconds
first copy time full-color9.5 seconds
copy resolution600 x 600 dpi
original capacity50 sheets
dimensions23.1" x 25.8" x 33.3" (587 x 655 x 845 mm)
weight220 lbs
power requirements120V, 60Hz, 12A
Printer Controller IconPrinter Controller
cpuRM7035C @ 533MHz
memory768 MB (512 MB + 256 MB) RAM (Standard); 1GB RAM (Maximum)
max. print speed20 ppm BW & Full-Color
max. print resolution1200 x 1200 dpi
standard interfaces10Base-T/100Base-TX Ethernet (RJ-45), USB 2.0 Device, USB 2.0 Host I/F
Scanner Specifications IconScanner Specifications
scanner resolutionFrom 100 to 600 dpi (1200 dpi for TWAIN)
scanning speed bw41 ipm
scanning speed full-color26 ipm
scan area main scan11.7" (297mm)
scan area sub scan17" (432mm)

Ricoh Aficio MP C2550

General Specifications IconGeneral Specifications
output speed25 ppm BW & Full-Color
warm-up time25 seconds
first copy time full-color9.5 seconds
copy resolution600 x 600 dpi
original capacity50 sheets
dimensions23.1" x 25.8" x 33.3" (587 x 655 x 845 mm)
weight220 lbs
power requirements120V, 60Hz, 12A
Printer Controller IconPrinter Controller
cpuRM7035C @ 533MHz
memory768 MB (512 MB + 256 MB) RAM (Standard); 1GB RAM (Maximum)
max. print speed25 ppm BW & Full-Color
max. print resolution1200 x 1200 dpi
standard interfaces10Base-T/100Base-TX Ethernet (RJ-45), USB 2.0 Device, USB 2.0 Host I/F
Scanner Specifications IconScanner Specifications
scanner resolutionFrom 100 to 600 dpi (1200 dpi for TWAIN)
scanning speed bw41 ipm
scanning speed full-color26 ipm
scan area main scan11.7" (297mm)
scan area sub scan17" (432mm)

Related product manuals