4. Press the [ ] or [ /Menu] key to select [Security Method], and then press the [#Enter] key.
Wireless LAN:
Security Method
5. Press the [ ] or [ /Menu] key to select [WEP], [WPA], or [WPA2], and then press the [#Enter]
key.
Security Method:
WEP
WEP
• For a 64-bit WEP key, enter the key using 10 hexadecimal digits.
• For a 128-bit WEP key, enter the key using 26 hexadecimal digits.
WPA
• If you select [WPA] as the WPA encryption method, select one of the following: [TKIP] or
[CCMP(AES)].
• If you select [WPA] as the WPA authentication method, select one of the following:
[WPA-PSK] or [WPA]. If you select [WPA-PSK], enter your PSK. If you select [WPA],
authentication settings and certificate installation settings are required.
• For PSK configuration, it is necessary to press the [#Enter] key to confirm the entry of
each character, pressing the [#Enter] key a total of 63 times. This means that you must
press the [#Enter] key 63 times even when the PSK is less than 63 characters.
• For details about installing certificates, see the Web Image Monitor Help.
WPA2
• If you select [WPA2] as the WPA encryption method, select one of the following: [TKIP]
or [CCMP(AES)].
• If you select [WPA2] as the WPA authentication method, select one of the following:
[WPA2-PSK] or [WPA]. If you select [WPA2-PSK], enter your PSK. If you select [WPA],
authentication settings and certificate installation settings are required.
• For PSK configuration, it is necessary to press the [#Enter] key to confirm the entry of
each character, pressing the [#Enter] key a total of 63 times. This means that you must
press the [#Enter] key 63 times even when the PSK is less than 63 characters.
• For details about installing certificates, see the Web Image Monitor Help.
6. Specify settings, and then press the [#Enter] key after setting is complete.
Quick Install for Network
Follow the procedure below to install the printer driver and the User Guide.
2. Preparing for Printing
64
To Next Page
Loading...
Need help?
General
Weight and Dimensions
