6. Loading Paper
This chapter explains the paper sizes and types supported by this printer, and how to load paper into the
paper trays.
Supported Paper for Each Tray
The tables in this section provide details of the sizes, types, feed directions, and maximum number of sheets
of paper that can be loaded in each of the printer's trays.
Symbols
In this manual On the display
Short-edge feed direction (Feed direction)
A4
8
1
/
2
× 11
• All paper must be set vertically, regardless of the paper size.
Standard Paper Feed Tray
Paper types
Plain Paper, Middle Thick, Thick Paper 1, Thick Paper 2, Thin Paper,
Letterhead, Label Paper, Coated Paper (Glossy), Coated Paper
(Matted), Special Paper 1, Special Paper 2, Preprinted Paper, Color
Paper, Recycled Paper
Paper sizes requiring manual
settings
The following sizes are supported, but they must be selected using the
control panel. For details about paper size settings, see "Setting a
paper size by using the control panel".
A4 , A5 , B5 JIS , 8
1
/
2
" × 14 " (Legal) , 8
1
/
2
" × 13 " (Foolscap)
, 8
1
/
2
" × 11 " (Letter) , 8
1
/
4
" × 13 " (Folio) , 8 " × 13 " (F/GL)
, 7
1
/
4
" × 10
1
/
2
" (Executive) , 16K , Custom Size
Custom paper size
The following custom sizes are supported, but they must be selected
using the control panel. For details about custom size paper settings,
see "Specifying custom size paper for standard paper feed tray".
• Approximately 148 - 216 mm (5.83 - 8.50 inches) in width
• Approximately 210 - 356 mm (8.27 - 14.01 inches) in length
105
To Next Page
Loading...
Need help?
General