Ready
This is the default ready message. The printer is ready for use. No action is required.
Resetting Job...
The printer is resetting the print job. Wait a while.
Setting change...
The printer is applying the changes made to its settings. Wait a while.
Waiting for print data...
The printer is waiting for the next data to print. Wait a while.
Alert Messages (in alphabetical order)
(A) Remove paper from Trays. Opn & cls Frt. Cov.
Open the front cover and remove any jammed paper. For details, see p.227 "Paper Misfeed Message
(A)".
(B) Open Front Cover and remove the paper.
Open the front cover and remove any jammed paper from the internal paper feed path. For details, see
p.231 "Paper Misfeed Message (B)".
(Y) Remove misfeed in Trays. Opn & cls Frt. Cov.
Open the front cover and remove any jammed paper. For details, see p.234 "Paper Misfeed Message
(Y)".
(Z) Open Front Cover and remove the paper.
Open the front cover and remove any jammed paper from the paper transfer unit. For details, see
p.235 "Paper Misfeed Message (Z)".
Waste Toner almost full
The waste toner bottle is almost full. Contact your sales or service representative to obtain a new waste
toner bottle.
Waste Toner Bottle full
Replace the waste toner bottle. For details, see p.154 "Replacing the Waste Toner Bottle".
@Remote Cert. update failed
Updating the @Remote certificate failed. Contact your sales or service representative.
Cannot connect=>Comm.Serv./ Check proxy user/password.
The proxy user name or password is incorrect. Check the proxy server settings, and change the user name
and/or password if they are incorrect.
9. Troubleshooting
202
To Next Page
Need help?
General
