Example: When this manual instructs you to press [Option], press the selection key on the left below the initial
screen.
9. [Menu] Key
Press this key to configure and check the current printer settings.
10. Data In Indicator
Flashes when the printer is receiving data from a computer. The data in indicator is lit if there is data to be printed.
11. Alert Indicator
Lights up or flashes when a printer error occurs.
Steady red: printing is not possible, or is possible but print quality cannot be ensured.
Flashing yellow: the printer will soon require maintenance or a replacement consumable such as print cartridge.
Follow the instructions that appear on the display.
12. Power Indicator
Lights up when the printer is ready to receive data from a computer. Flashes when the printer is warming up or
receiving data. It is unlit when the power is off or while the printer is in energy saver mode.
13. [Suspend/Resume] Key
Press this to suspend the print job currently being processed. The indicator remains lit as long as the job is
suspended.
To resume the job, press this key again. Resumption of a suspended job will occur automatically when the time
specified in [Auto Reset Timer] elapses (default: 60 seconds).
For details about the [Auto Reset Timer] setting, see "Making Printer Settings Using the Control Panel", Software
Guide.
• p.39 "Setting the ECO Night Sensor"
1. Guide to the Printer
22
To Next Page
Loading...
Need help?
General