14. Select [Print Test Pattern 2] to print gradation correction sheet 2. Adjust the midtones on
gradation correction sheet 2 by repeating the procedure you used to adjust the color values
on gradation correction sheet 1.
15. After completing all settings, press the [Menu] key to return to the initial screen.
• p.194 "Viewing the Gradation Correction Sheet"
Viewing the Gradation Correction Sheet
Reading the gradation correction sheet
The printed gradation correction sheet is read as shown below.
Comparing the gradation correction sheet and correction value of each color, K (black), M
(magenta), and C (cyan)/Y (yellow) determine the required gradation correction and configure
settings using the control panel.
1. K (black) correction values
Used to adjust the color printed when only black toner is used. The currently set correction value is printed
in red.
2. M (magenta) correction values
Used to adjust the color printed when only magenta toner is used. The currently set correction value is
printed in red.
3. C (cyan)/Y (yellow) correction values
Used to correct the colors printed when cyan and yellow are used. For C/Y (cyan/yellow), the correction
value is determined based on combinations of these two colors, although panel settings are configured for
each color.
8. Adjusting the Printer
194
To Next Page
Loading...
Need help?
General