It takes too much time to turn on the printer.
• If the printer is turned off while it is still accessing the hard disk (for example: during file deletion), the
printer will require more time to power-up the next time it is turned on. To avoid this time delay, do
not turn the power off while it is in operation.
It takes too much time to resume printing.
• The data is so large or complex that it takes time to process it. If the data in indicator is blinking, the
data is being processed. Just wait until it resumes.
• The printer was in the Energy Saver mode. To resume from the Energy Saver mode, the printer has to
warm up, and this takes time until printing starts. To disable the Energy Saver mode, select [Off] for
[Energy Saver On/Off] in the [System], [Energy Saver] menu.
It takes too much time to complete the print job.
• Photographs and other data intensive pages take a long time for the printer to process, so simply wait
when printing such data.
Changing the settings with printer driver may help to speed up printing.
For details, see the printer driver Help.
• The data is so large or complex that it takes time to process it. If the data in indicator is blinking, the
data is being processed. Just wait until it resumes.
• If "Waiting for print data..." appears on the display, the printer is now warming up. Wait for a while.
• The printer is adjusting the color registration. Wait for a while.
Prints fall behind the machine when they are output.
• Raise the appropriate stop fence (forward fence for A4, rear fence for legal size prints).
See, p.15 "Exterior: Front View".
With Windows 2000/XP/Vista/7, Windows Server 2003/2003 R2/2008/2008 R2, attached
options are not detected.
• The computer and printer are not in two-way communication. You must configure attached options in
the printer properties.
For details, see the printer driver Help.
If the problem cannot be solved, contact your sales or service representative.
With Windows 2000/XP/Vista/7, Windows Server 2003/2003 R2/2008/2008 R2, when
doing aggregate prints or bound prints.
• Check that the paper size and direction set in the [Menu] tab of the printer driver are the same as
those set in the application.
If the settings are not the same, change the settings of the printer driver.
9. Troubleshooting
220
To Next Page
Loading...
Need help?
General