• If the power cord is damaged and its inner wires are exposed or broken, contact your service
representative for a replacement. Use of damaged power cords could result in fire or electric shock.
• Be sure to locate the machine as close as possible to a wall outlet. This will allow easy disconnection
of the power cord in the event of an emergency.
• Do not use flammable sprays or solvents in the vicinity of this machine. Doing so could result in fire
or electric shock.
• Keep the machine away from humidity and dust. Otherwise a fire or an electric shock might occur.
• Do not place the machine on an unstable or tilted surface. If it topples over, an injury might occur.
• Make sure the room where you are using the machine is well ventilated and spacious. Good
ventilation is especially important when the machine is used heavily.
• Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around the
prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.
• Machine sound levels exceeding [Sound Power Level (Black and White)] > 63 dB (A) are not
suitable for desk work environments, so place the machine in another room.
• When new, electrical devices containing volatile materials will normally release emissions into
the air of their vicinity. For this reason, for the first few days after installation of a new device,
strong ventilation inside the room where it is placed is necessary.
Space Required for Installation
The recommended (or minimum) space requirements are as follows:
Place to Install
27
To Next Page
Loading...
Need help?
General