30
If you are using the camera for the first time, read this section.
1
Turn the power on for the first time after purchase.
• The language selection screen appears.
• To skip language setting, press the DISP. button.
• When the DISP. button is pressed, the language setting is
canceled and the date/time setting screen appears.
2
Press ADJ./OK button
!"#$ to select a language.
3
Press the ADJ./OK button.
• The display language is set, and
the date/time setting screen
appears.
Note ---------------------------------------------------------------------------------------------------
For how to set the display language and date/time on the setup menu, see “Language
Settings” (GP.195) and “Date and Time Settings” (GP.194) in this guide.
Setting the Language
When the power is turned on for the first time, the language
setting screen appears (for the picture display language). After
setting the language, go on to the date/time setting (for printing
the date and time on your photos).
You can shoot without these settings. However, be sure to set the
language, and the date/time later. Use the setup menu for these
settings.
To Next Page
Loading...
Need help?
General
