To Next Page

To Previous Page

If you are using the camera for the first time, read this section.

Changing the Display with

the DISP. Button

Pressing the DISP. button allows you to change the screen

display mode and toggle the information displayed on the

picture display.

During Shooting Mode

Grid Guide Display-------------------------------------------------------------------------------

• This displays auxiliary lines on the picture display to help you compose your picture.

These lines are not recorded with images.

• See P.188 for information on choosing a grid guide.

Synchro-Monitor Mode -------------------------------------------------------------------------

This turns the picture display off except when the camera is operated. This is effective

for saving power consumption. In this mode, pressing the shutter release button

halfway turns the picture display on. Subsequently, pressing the shutter release button

fully displays the shot image on the picture display and then turns the picture display

off.

(This setting is different from [LCD Auto Dim] in the setup menu.)

Note ---------------------------------------------------------------------------------------------------

• When [Shooting Info. Display Frame] is set to [On] in the setup menu, the shooting

information display frame can be displayed for normal symbol display and histogram

display. (GP.189)

• In easy shooting mode, the display cannot be changed using the DISP. button.

Normal Symbol Display

No Display

Histogram Display Grid Guide Display

Picture Display Off

(Synchro-Monitor Mode)

Press the DISP. button to

change the display.

Ricoh CX2 User Manual

Other manuals for Ricoh CX2