71
Using the Fn (Function) Button
2
If [AF/MF] is assigned to the Fn (Function) button (G P.174), the
Fn button can be used to toggle between [MF] and the AF mode
currently selected for [Focus] (or, if [MF] is selected for [Focus],
between [MF] and whatever AF mode was last selected for [Focus]
before [MF]).
1
Set [Set Fn Button] to [AF/MF] on the setup menu.
• For the operating procedure, see P.174.
2
With the camera ready to
shoot, press the Fn button.
• When the focus mode changes to
manual focus, the [MF] symbol
appears at the upper right of the
screen.
Caution------------------------------------------------------------------------------------------
When [Focus] is set to [Multi-trgt AF], [Snap] or [A] (G P.103), pressing the Fn
button does not switch between AF and MF.
Note ----------------------------------------------------------------------------------------------
• For information on how to use manual focus, see P.105.
• You can also use the shooting menu to make the [Focus] setting. (G P.103)
AF/MF
[Focus] setting Press the Fn button
Multi AF Switches between [MF] and [Multi AF].
Spot AF Switches between [MF] and [Spot AF].
Continuous AF Switches between [MF] and [Continuous AF].
MF Switches between [MF] and the AF mode last selected for [Focus].
Hold
To Next Page
Loading...
Need help?
General
