66
Using the Fn (Function) Button
2
2 Using the Fn (Function) Button
When a function is assigned to the Fn (Function) button with [Set Fn
Button] on the setup menu (
G P.174), you can easily switch from
one function to another simply by pressing the Fn button.
The following functions can be assigned to the Fn button. For the
operating procedure of each function, see the corresponding
reference page.
(*)
[Multi AF] or [Spot AF]
Note ----------------------------------------------------------------------------------------------
• For information on the items that can be assigned in each shooting mode, see P.177.
• The Fn button can not be used as described above when [Miniaturize] is selected in
scene mode.
• Pressing the Fn button in playback mode displays the image assigned with [Flag
Function Setting]. For the operating procedure, see P.140-142.
• Selecting [Trim], [Level Compensation] (when [Manual] is selected), or [White
Balance Compensation] on the playback menu, and pressing the Fn button displays
the screen that describes the operating procedure. (G P.144, 148, 150)
Available Setting Description Refer to
Macro Target
*Default setting
Moves the AF target without moving the camera to
shoot close-ups.
P.67
AE Lock Locks the exposure. P.68
AF/Cont. AF Switches between auto focus (*) and continuous AF. P.69
AF/M-trgt AF
Switches between auto focus
(*)
and multi-target AF.
P.70
AF/MF
Switches
between
auto focus
(*)
and manual focus. P.71
AF/Snap
Switches
between
auto focus
(*)
and snap mode. P.72
Step Zoom, AT-BKT,
WB-BKT, CL-BKT,
FOCUS-BKT
Switches between on and off for each function. P.73
To Next Page
Loading...
Need help?
General
