187
Setup Menu
7
When [Level Setting] is turned on, the camera uses a level indicator
and sounds to let you know whether the image is level. You can
select from the following level confirmation settings. For information
on how to use the level function during shooting, see P.58.
1
Display the setup menu.
• For the operating procedure, see P.166.
• You can also press and hold the DISP. button in shooting mode to
display the setting menu. If you pressed and held the DISP. button,
skip to Step 3.
2
Press the ADJ./OK button " to
select [Level Setting] and
press the button $.
3
Press the button !" to select
the desired setting.
4
Press the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------
• For information on how to use the level function during shooting, see P.58.
• The level function is not available when recording movies or during interval shooting.
• When [Volume Settings] is set to [
] (Mute), the level sound is not emitted even
when [Level Setting] is set to [Display+Sound] or [Sound].
Level Confirmation
Available Settings Description
Off The level indicator will not display. The level sound will not emit.
Display
*Default setting
The level indicator will display. The level sound will not emit.
Display+Sound The level indicator appears on the screen and a level sound is
emitted when the camera is level.
Sound The level indicator will not display. A level sound is emitted when
the camera is level.
To Next Page
Loading...
Need help?
General
