If you are using the camera for the first time, read this section.
47
• Files displayed with the S
symbol are images taken with
M-Cont Plus, Speed Cont, or
Multi-trgt AF. See P.132 for more
information on playing back
images.
• To switch the camera from playback mode to shooting mode,
press the 6 button again.
Note ---------------------------------------------------------------------------------------------------
Setting your favorite image files to [Flag Function Setting] on the playback menu allows
you to easily display these files. (GP.140)
Checking the image in shooting mode----------------------------------------------------
In shooting mode, immediately after you take a still image, the still image is displayed
on the screen for a moment so you can check it. You can change the image display
time using [LCD Confirmation Time] on the setup menu. (GP.182)
When [LCD Confirmation Time] is set to [Hold], the image remains displayed until the
next time you half-press the shutter release button. When [LCD Confirmation Time] is
set to [Hold], the displayed image can also be enlarged or deleted. (GP.50, 52)
Turning on the camera in playback mode------------------------------------------------
When the camera is off, pressing and holding the 6 (Playback) button turns the
camera on. (The camera starts up in playback mode.)
When the camera has been turned on with the 6 button, pressing the 6 button
again switches playback mode to shooting mode.
Where images are played back from-------------------------------------------------------
When no SD memory card is loaded, the camera plays back from the internal memory.
When an SD memory card is loaded, it plays back from the SD memory card.
To Next Page
Loading...
Need help?
General
