120
Various Shooting Functions
1
The exposure setting enables you to select the brightness level for
your picture. Normally, if your subject is centered, backlight
compensation is automatically activated, and you can shoot with
the correct exposure.
In the following cases, or when you intentionally want to change the
exposure, you can adjust the exposure setting. Exposure can be
specified in the range from -2.0 EV to +2.0 EV. Setting the level
higher (+) makes the picture brighter and lower (-) makes the
picture darker.
For backlighting
When the background is particularly bright, the subject will appear dark
(underexposed). In this case, set the exposure level higher (+).
When your subject is whitish
The entire picture will turn out dark (underexposed). Set the exposure level
higher (+).
When your subject is darkish
The entire picture will turn out bright (overexposed). Set the exposure level
lower (-).
The same happens when you take a photo of a subject in a spotlight.
1
Turn the mode dial to 5/P/A/SCENE, and press the
ADJ. lever.
2
Press the ADJ. lever, or press the #$ buttons until the
exposure compensation bar appears.
3
Press the !" buttons to set the exposure setting.
• You can also press the shutter release button to take a picture.
Changing the Exposure
(Exposure Comp.)
To change the setting, use the shooting menu or the ADJ. lever. This section explains easy
ways to change the shading setting with the ADJ. lever. (GP.64)
To use the shooting menu, see “Using the Menu”. (GP.89)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
