225
7
Appendices
When shooting or viewing still images for a long time, or when
connecting to your computer, use of the AC adapter (sold
separately) is recommended.
If you have already used this camera, make sure it is turned off
before loading the AC adapter coupler.
1
Slide the release lever toward
OPEN to open the battery/
card cover.
2
Insert the AC adapter coupler.
• When the AC adapter coupler is
loaded in place, it is locked with the
hook shown in the figure.
3
Open the power (DC input)
cable cover and place the
cable outside.
4
Close the battery/card cover
and slide the release lever in
the opposite direction of
OPEN to lock it in place.
5
Plug the power cord into an
outlet.
Caution------------------------------------------------------------------------------------------
• When closing the battery/card cover, slide the release lever and be sure to lock it in
place.
• Be sure to attach the AC cable and plug the power cord into the outlet firmly.
• When you are not using the camera, unplug the AC adapter from the camera and the
power outlet.
• If you disconnect the AC adapter from the camera or the plug from the outlet while the
camera is in use, data may be lost.
• If you are using the AC adapter, may appear. This does not indicate a
malfunction and you can continue to use the camera.
• When using the AC adapter, do not carry the camera by the cable of the AC adapter.
Using the AC Adapter (sold separately)
1
2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
