EasyManuals Logo
Home>Ricoh>Digital Camera>GR Digital II

Ricoh GR Digital II User Manual

Ricoh GR Digital II
242 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
28
If you are using the camera for the first time, read this section.
Where images are recorded-------------------------------------------------------------------
When no SD memory card is loaded, the camera records images to the internal
memory; when an SD memory card is loaded, it records images to the SD memory
card.
Caution-----------------------------------------------------------------------------------------------
If an SD memory card is loaded, the camera does not record to the internal memory,
even if the card is full.
Take care not to get the contacts of the card dirty.
Write-protecting your images ----------------------------------------------------------------
Move the write-protection switch on the SD memory card to
LOCK to prevent your still images from being accidentally
erased or the card from being formatted. If you unlock the card
(by returning the switch to its original position), it is once again
possible to erase images and format the card.
It is recommended to move the write-protection switch to LOCK
when you have some important data recorded.
Note that you cannot shoot images on a locked card because no
data can be recorded to the card. Unlock the card before shooting.
SD Memory Card (available in stores)
You can store still images you have taken either in the camera’s
internal memory or on an SD memory card (available in stores).
The internal memory capacity is approx. 54 MB.
To record a lot of still images or movies at high resolutions, use a
high-capacity SD memory card.
When no SD memory card is loaded When an SD memory card is loaded
Records to the internal memory Records to the SD memory card

Table of Contents

Other manuals for Ricoh GR Digital II

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh GR Digital II and is the answer not in the manual?

Ricoh GR Digital II Specifications

General IconGeneral
Megapixel10 MP
Sensor typeCCD
Maximum image resolution3648 x 2736 pixels
Still image resolution(s)640 x 480, 1280 x 960, 2048 x 1536, 2592 x 1944, 2736 x 2736, 3264 x 2448, 3648 x 2432, 3648 x 2736
Optical zoom0 x
InterfaceUSB2.0, Mini-B cable, Mass storage 8, AV output
Digital SLRYes
Power sourceDB60
Camera shutter speed1/30 - 1/2000 s
Effective sensor resolution1 pixels
Minimum storage drive space160 MB
Minimum system requirementsWindows Vista, XP, 2000
Focus adjustmentManual
Auto focusing (AF) modesmulti point auto focus, spot auto focus
Flash modesauto, Flash off, Red-eye reduction, Slow synchronization
Flash range (wide)0.2 - 3 m
Internal memory54 MB
Compatible memory cardsmmc, sd
Motion JPEG frame rate30 fps
Video formats supportedAVI
Maximum video resolution640 x 480 pixels
Display diagonal2.7 \
Display resolution (numeric)1024 pixels
Product colorBlack, Silver
Battery technologyAlkaline
Number of batteries supported1
Operating temperature (T-T)0 - 40 °C
Image editingresizing, rotating
White balanceauto, Cloudy, daylight, flash, Fluorescent, Incandescent, manual
Light meteringCentre-weighted, Spot
Light exposure modesaperture priority AE, auto, manual
Weight and Dimensions IconWeight and Dimensions
Depth25 mm
Width107 mm
Height58 mm
Weight168 g

Related product manuals