Guide to Components (mainly North America)
• Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal
components.
Front and left view
1. ADF
Lower the ADF over originals placed on the exposure glass.
If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.
2. Exposure glass
Place originals face down here. For details, see page 86 "Placing Originals on the Exposure Glass
(mainly North America)".
3. Control panel
See page 57 "Guide to the Names and Functions of the Machine's Control Panel".
4. Main power switch
To operate the machine, the main power switch must be on. If it is off, open the main power switch's cover and
turn the switch on.
2. Getting Started
34
To Next Page
Loading...
Need help?
General
