2
Getting Started
42
u Caution
• When the monitor is closed with the LCD screen facing
inward, you cannot play back images and display the menus
unless the camera is connected to an AV device equipped
with an HDMI terminal.
• Do not hold the camera by the monitor or rotate the monitor
beyond its movable range.
• Do not carry the camera or put it in a bag with the monitor
open. You can carry the camera when the monitor is closed
regardless of the LCD screen direction.
t Memo
• To close the monitor with the LCD screen facing inward,
rotate the monitor 180° forward in Step 2 and then 180° to the
right.
• The items displayed on the monitor rotate according to the
direction and angle of the monitor.
Turn the camera on and make the initial settings.
1 Turn the main switch to
[ON].
The lamp lights up in green.
The first time the camera is
turned on after purchase, the
[Language/W] screen
appears.
t Memo
• The power automatically turns off when you do not perform
any operations within a set period of time. (Default setting:
1min.) You can change the setting in [Auto Power Off] of the
D3 menu. (p.33)
1 Use ABCD to select the desired language and
press E.
The [Initial Setting] screen
appears in the selected
language.
Proceed to Step 6 if F
(Hometown) does not need to be
changed.
2 Press B to move the frame to F and press D.
The [F Hometown] screen appears.
Initial Settings
Turning the Camera On
Setting the Display Language
Text Size
Std.
New York
English
Initial Setting
Settings complete
Cancel
To Next Page
Loading...
Need help?
General
