3
Shooting
65
You can precisely fine-tune your lenses with the camera’s
autofocus system.
1 Select [23 AF Fine Adjustment] in E4 menu and
press D.
The [23 AF Fine Adjustment] screen appears.
2 Select [Apply All] or [Apply One] and press E.
3 Select [Setting] and adjust
the value.
Available operations
4 Press E.
The adjustment value is saved.
5 Press F twice.
The camera returns to standby mode.
1 Press D in standby mode.
The Drive Mode screen appears.
2 Select a drive mode.
AF Fine Adjustment
E4
Apply All
Applies the same adjustment value to all lenses.
Apply One
Saves an adjustment value for the lens being
used. (Up to 20 values)
D/R to the right Adjusts the focus to a closer
position.
C/R to the left Adjusts the focus to a farther
position.
M
Resets the adjustment value to
the default setting.
±0±0
±0±0
33
2323
AF Fine AdjustmentAF Fine Adjustment
Apply OneApply One
SettingSetting
Reset Individual SettingsReset Individual Settings
SaveSave
CancelCancel
Setting the Drive Mode
Single Frame Shooting
(L)
Normal capture mode
Continuous Shooting
(Z, b)
Continuously takes pictures while
0 is kept pressed. (p.66)
Self-timer
(O, P, Y)
Releases the shutter about 12
seconds or 2 seconds after
0 is pressed. (p.67)
Remote Control
(Q, R, S)
Enables shooting with remote
control. (p.67)
Bracketing
(T, 1, U)
Takes consecutive pictures at
different exposure levels. (p.68)
Mirror Lock-up
Shooting
(c, d)
Takes pictures with the mirror
raised. (p.69)
Multi-exposure
(V, z, W, X)
Creates a composite image by
taking multiple pictures and
merging them into a single image.
(p.70)
Interval Shooting
(q, U, V, w)
Au to ma ti ca ll y t ake s pi ct ur es at set
intervals. (p.71)
Single Frame Shooting
Cancel
OK
To Next Page
Loading...
Need help?
General
