Ricoh PENTAX KF User Manual

3
Shooting
52
1 Set the mode dial to the desired exposure mode.
Q or R appears on the
status screen for the value that
can be changed.
The value that can be changed is
underlined in the viewfinder.
During Live View, D appears for
the value that can be changed.
2 Turn R.
The aperture value is changed in
J, K, L, or M mode.
The sensitivity is changed in H
mode.
3 Turn Q.
The shutter speed is changed in
I, K, or L mode.
t Memo
• The settings for the exposure can be specified in increments
of 1/3 EV steps. In [1 EV Steps] of the E1 menu, you can
change the adjustment steps to 1/2 EV steps.
•In L mode, the difference from the correct exposure is
displayed on the EV bar scale while the exposure is adjusted.
• For each exposure mode (excluding M mode), you can set
the camera operation for when Q or R is turned or M
is pressed. Set in [E-Dial Programming] of [Button
Customization] in the A 5 menu. (p.101)
u Caution
• The correct exposure may not be obtained with the selected
shutter speed and aperture value when the sensitivity is fixed
at a certain sensitivity.
1/1/
3030
FF
4.54.5
99 9 9999999
10 0100
1/
30
1/
30
F4.5
F4.5
100
100
9999
9999
Noise Reduction when Shooting with a Slow Shutter
Speed
When shooting with a slow shutter speed, you can reduce
image noise in [Slow Shutter Speed NR] of [Noise
Reduction] in the A2 menu.
Auto
Applies Noise Reduction according to the shutter
speed, sensitivity, and internal temperature of the
camera.
On
Applies Noise Reduction when the shutter speed
is slower than 1 second.
Off
Does not apply Noise Reduction at any shutter
speed.

Ricoh PENTAX KF Specifications

General

Brand	Ricoh
Model	PENTAX KF
Category	Digital Camera
Language	English