Paper and Other Media
24
Loading Paper in the Bypass Tray
Specifying standard size paper for the Bypass Tray
This describes how to load standard size paper into the bypass tray.
❒ Shuffle the paper before loading the stack onto the tray, so multiple sheets are
not fed in together.
❒ Set the size and direction of the loaded paper on the control panel or with the
printer driver. Make sure the settings do not conflict. Otherwise, the paper
may jam or the print quality may be affected.
❒ Load paper with the print side down and in the short-edge feed direction.
A Press the mark in the center of the bypass tray.
Open the bypass tray.
To Next Page
Loading...
Need help?
General