Paper and Other Media
9
Paper Recommendations
Loading Paper
❒ Do not use ink-jet printer paper because it may stick to the fusing unit and
cause a paper misfeed.
❒ When printing on OHP transparencies that have a print side, load them with
the print side over on the bypass tray. Not taking this precaution may cause
them to stick to the fusing unit and cause misfeeds.
❒ Set the paper as described below
• Tray 1: Print side facing up
• Bypass Tray: Print side facing down
• Paper Feed Unit (Tray 2, Tray 3): Print side facing up
❒ Print quality cannot be guaranteed if paper other than the ones recommended
is used. For more information about recommended paper, contact your sales
or service representative.
❒ Do not use paper that has already been printed onto by other printers.
Storing Paper
• Paper should always be stored properly. Improperly stored paper might result
in poor print quality, paper misfeeds, or printer damage. Recommendations
are as follows:
• Avoid storing paper in humid areas.
• Avoid exposing paper to direct sunlight.
• Store on a flat surface.
• Keep paper in the package in which the paper came.
Types of Paper and Other Media
Plain Paper
Paper thickness
60.2 - 104.7 g/m
2
(16 - 28 lb.)
• [Plain Paper 1]: 60.2 - 90.2 g/m
2
(16 - 24 lb.)
• [Plain Paper 2]: 90.2 - 104.7 g/m
2
(24 - 28 lb.)
To Next Page
Loading...
Need help?
General