Adjusting the Printer
77
Comparing at the gradation correction sheet and correction value of each col-
or, K (black), M (magenta), and C (cyan)/Y (yellow), determine the gradation
correction and make settings using the control panel.
❒ XXXX represents the printer model name.
A K (black) correction values
Adjust the printed color when only black toner is used. The currently set
correction value is printed in red.
B M (magenta) correction values
Adjust the printed color when only magenta toner is used. The currently set
correction value is printed in red.
C C (cyan)/Y (yellow) correction values
Correct the color printed when cyan and yellow are used. For C/Y (cy-
an/yellow), the correction value is determined based on a combination of
these two colors, although settings are made for separately each color.
D K, M, C/Y
The numerical value set at time of gradation correction sheet printing is dis-
played. This corresponds to the numerical value set using the operation
panel.
Resetting the gradation correction value to the initial value
Reset the correction value default.
To Next Page
Loading...
Need help?
General