Rigol DS1104Z-S Plus Programming Guide

RIGOL Chapter 2 Command System
2-94 MSO1000Z/DS1000Z Programming Guide
:MATH:OFFSet
Syntax
:MATH:OFFSet <offs>
:MATH:OFFSet?
Description
Set or query the vertical offset of the operation result. The unit depends on the operator
currently selected and the unit of the source.
Parameter
Name
Type
Range
Default
<offs>
Real
Related to the vertical scale of the operation result
Range: (-1000 x MathVerticalScale) to (1000 x
MathVerticalScale)
Step: MathVerticalScale/50
0.00V
Explanation
MathVerticalScale is the vertical scale of the operation result and can be set by
the :MATH:SCALe command.
Return
Format
The query returns the vertical offset of the operation result in scientific notation.
Example
:MATH:OFFSet 8 /*Set the vertical offset to 8V*/
:MATH:OFFSet? /*The query returns 8.000000e+00*/
Related
Commands
:MATH:OPERator
:CHANnel<n>:UNITs
:MATH:INVert
Syntax
:MATH:INVert <bool>
:MATH:INVert?
Description
Enable or disable the inverted display mode of the operation result, or query the inverted
display mode status of the operation result.
Parameter
Name
Type
Range
Default
<bool>
Bool
{{1|ON}|{0|OFF}}
0|OFF
Explanation
 This command is invalid for the FFT operation.
 This command has the same function as the :MATH:OPTion:INVert command.
Return
Format
The query returns 1 or 0.
Example
:MATH:INVert ON /*Enable the inverted display mode*/
:MATH:INVert? /*The query returns 1*/
Related
Command
:MATH:OPERator

Rigol DS1104Z-S Plus Specifications

General

Brand	Rigol
Model	DS1104Z-S Plus
Category	Test Equipment
Language	English