EasyManua.ls Logo

Rigol DS1104Z-S Plus Programming Guide

Rigol DS1104Z-S Plus
260 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #216 background imageLoading...
Page #216 background image
RIGOL Chapter 2 Command System
2-200 MSO1000Z/DS1000Z Programming Guide
:TRIGger:NEDGe:IDLE
Syntax
:TRIGger:NEDGe:IDLE <NR3>
:TRIGger:NEDGe:IDLE?
Description
Set or query the idle time in Nth edge trigger. The default unit is s.
Parameter
Name
Type
Range
Default
<NR3>
Real
16ns to 10s
1μs
Return Format
The query returns the idle time in scientific notation.
Example
:TRIGger:NEDGe:IDLE 0.002 /*Set the idle time to 2ms*/
:TRIGger:NEDGe:IDLE? /*The query returns 2.000000e-03*/
:TRIGger:NEDGe:EDGE
Syntax
:TRIGger:NEDGe:EDGE <NR1>
:TRIGger:NEDGe:EDGE?
Description
Set or query the number of edges in Nth edge trigger.
Parameter
Name
Type
Range
Default
<NR1>
Integer
1 to 65535
2
Return Format
The query returns an integer between 1 and 65535.
Example
:TRIGger:NEDGe:EDGE 20 /*Set the number of edges to 20*/
:TRIGger:NEDGe:EDGE? /*The query returns 20*/
:TRIGger:NEDGe:LEVel
Syntax
:TRIGger:NEDGe:LEVel <level>
:TRIGger:NEDGe:LEVel?
Description
Set or query the trigger level in Nth edge trigger. The unit is the same as the current
amplitude unit.
Parameter
Name
Type
Range
Default
<level>
Real
(-5 x VerticalScale - OFFSet) to
(5 x VerticalScale - OFFSet)
0
Explanation
For VerticalScale, refer to :CHANnel<n>:SCALe. For OFFSet, refer
to :CHANnel<n>:OFFSet.
This command is only available when the signal source is an analog channel.
Return Format
The query returns the trigger level in scientific notation.
Example
:TRIGger:NEDGe:LEVel 0.16 /*Set the trigger level to 160mV*/
:TRIGger:NEDGe:LEVel? /*The query returns 1.600000e-01*/

Table of Contents

Other manuals for Rigol DS1104Z-S Plus

Question and Answer IconNeed help?

Do you have a question about the Rigol DS1104Z-S Plus and is the answer not in the manual?

Rigol DS1104Z-S Plus Specifications

General IconGeneral
Bandwidth100 MHz
Sample Rate1 GSa/s
Channels4
Memory Depth24 Mpts
Vertical Resolution8 bits
Vertical Sensitivity1 mV/div to 10 V/div
Timebase Range2 ns/div to 1000 s/div
Waveform RecordUp to 60, 000 frames
FFTYes
Waveform Capture Rate30, 000 wfms/s
Display7-inch TFT LCD
Trigger ModesEdge, Pulse, Video, Window, Timeout
InterfacesUSB, LAN
Serial Bus Triggering and DecodingI2C, SPI, UART
Input Impedance1 MΩ
Power Supply100-240 VAC, 45-440 Hz

Related product manuals