RIGOL
XII DS2000E User’s Guide
Working Environment
Temperature
Operating: 0°C to +50°C
Non-operating: -40°C to +70°C
Humidity
0°C to +30°C: ≤95%RH
+30°C to +40°C: ≤75%RH
+40°C to +50°C: ≤45%RH
WARNING
To avoid short circuit inside the instrument or electric shock, never
operate the instrument in a humid environment.
Altitude
Operating: below 3 km
Non-operating: below 15 km
Installation (Overvoltage) Category
This product is powered by mains conforming to installation (overvoltage) category
II.
Ensure that no overvoltage (such as that caused by a bolt of lightning)
can reach the product. Otherwise, the operator might be exposed to the
danger of an electric shock.
Installation (Overvoltage) Category Definitions
Installation (overvoltage) category I refers to signal level which is applicable to
equipment measurement terminals connected to the source circuit. Among these
terminals, precautions are done to limit the transient voltage to a low level.
Installation (overvoltage) category II refers to the local power distribution level
which is applicable to equipment connected to the AC line (AC power).
To Next Page
Loading...
Need help?
General
