Rigol DS2000E Series User Manual

RIGOL
XVIII DS2000E User’s Guide
Document Overview
Main Topics of this Manual:
Chapter 1 Quick Start
Introduces the preparations before using the
oscilloscope and provides a basic
introduction of the instrument.
Chapter 2 To Set the Vertical System
Introduces the vertical system functions of
the oscilloscope.
Chapter 3 To Set the Horizontal
System
Introduces the horizontal system functions
of the oscilloscope.
Chapter 4 To Set the Sample System
Introduces the sample system functions of
the oscilloscope.
Chapter 5 To Trigger the Oscilloscope
Introduces the trigger mode, trigger
coupling, trigger holdoff, trigger source, and
various trigger types of the oscilloscope.
Chapter 6 MATH and Measurements
Introduces how to make math operation,
cursor measurement, and auto
measurement.
Chapter 7 Protocol Decoding
Introduces how to decode the input signal by
using those common protocols.
Chapter 8 Reference Waveform
Introduces how to compare the input
waveform with the reference waveform.
Chapter 9 Pass/Fail Test
Introduces how to monitor the input signal
by using the Pass/Fail test.
Chapter 10 Waveform Record
Introduces how to record waveforms, play
back, and analyze the recorded waveforms.
Chapter 11 Display Control
Introduces how to control the display of the
oscilloscope.
Chapter 12 Store and Recall
Introduces how to store and recall the setup
file, the waveform file, etc.
Chapter 13 System Function Setting
Introduces how to set the remote interfaces
and system-related functions.
Chapter 14 Remote Control
Introduces how to control the oscilloscope
remotely.
Chapter 15 Troubleshooting
Introduces how to deal with the common
failures of the oscilloscope.
Chapter 16 Specifications
Provides the technical specifications and
general specifications of the oscilloscope.
Chapter 17 Appendix
Provides the basic information for the
options and accessories.

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English