RIGOL Chapter 1 Quick Start
1-10 DS2000E User’s Guide
Rear Panel Overview
Figure 1-10 Rear Panel
1． Handle
Rotate the handle upright to carry the instrument easily. Rotate it downward if
you do not need to carry it.
2． LAN
Connect the instrument to network via this interface for remote control. The
instrument is in compliance with the standards specified in LXI Core 2011 Device.
It can be used to set up a test system with other standard devices.
3． USB Device
A PictBridge printer can be connected via this interface to perform the print
operation, and a PC can be connected via this interface to control the instrument
with the PC software.
4． Trigger Out and Pass/Fail
Trig Out:
A signal which reflects the current oscilloscope capture rate can be output
1 2 3
To Next Page
Loading...
Need help?
General
