61
About Other Features
You can copy recorded data saved on removable storage to a USB hard disk or other external storage device. Make it a habit to
back up important data by copying it to external storage.
Formatting External Storage
When an external storage device that requires formatting is connected to the R-1000, a confirmation screen appears. Touch
[Format] at the confirmation screen to start formatting. Before attempting copy operations, be sure to carry out formatting.
* The screen does not appear when an external storage device that does not need formatting is connected. Simply go ahead and carry out the
copy operation directly.
fig.format-ext-strage.eps
Carrying out this operation deletes all data saved on the external storage device. Before formatting, first make sure no necessary data is
remaining on the device.
If an external storage device that you do not want to format is connected, detach the device without touching [Format]. Detaching the device
makes the confirmation screen disappear.
To reformat a previously formatted external storage device, refer to the procedure in “Reformatting a Formatted Removable Storage Device” (p. 19).
Copying Recorded Data
With the steps below, you can copy recorded data on removable storage to external storage.
1. Display the menu screen.
Press the [MENU] button to display the menu screen.
2. Access the project setting screen.
At the touch panel, touch [PROJECT] to access the project setting screen.
fig.open-project-menu.eps
Copying Recorded Data to External Storage
To Next Page
Loading...
Need help?
General
