Roland R-1000 User Manual

72
Appendices
fig.spec-sheet.eps
* 0 dBu = 0.775 Vrms
* When a REAC Splitter & Distributor S-4000D or a switching hub is used in-line with REAC cables, the network latency will increase by the amount
of processing delay introduced by the splitting device itself. The actual delay is dependant upon the specifications of the splitting device,
though the maximum delay amount for a single splitting device should be about 200 microseconds.
* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
Main Specifications
Recording
Number of
Tracks
D/A
Conversion
File Format
Recording
Time
44.1/48 kHz
96 kHz
Max 48
Max 24
Sampling Frequency
Signal Processing
44.1/48/96 kHz
24 bits
BWF (Broadcast Wave Format)
Recording Media
Removable HDD or
Removable SSD
44.1 kHz/48 tracks 64GB
120GB
500GB
: Approx 160 minutes
: Approx 310 minutes
: Approx 1300 minutes
48 kHz/48 tracks 64GB
120GB
500GB
: Approx 150 minutes
: Approx 280 minutes
: Approx 1200 minutes
96 kHz/24 tracks 64GB
120GB
500GB
: Approx 150 minutes
: Approx 280 minutes
: Approx 1200 minutes
* These recording times are approximate. Your actual results may vary
somewhat.
* If multiple projects and songs exists, the total recordable time will be
less than these.
Output
Frequency
Response
MONITOR OUT(1/2)
PHONES
-2 dB/+0 dB
(20 k ohms load, + 4 dBu, typ.)
-3 dB/+0 dB
(40 ohms load, 150 mW, typ.)
* Sample Rate : 48.0 kHz or 44.1 kHz
Nominal
Output Level
MONITOR OUT(1/2) +4 dBu
(Load impedance : 10 k ohms, typ.)
Output
Impedance
MONITOR OUT(1/2)
PHONES
600 ohms (typ.)
46 ohms (typ.)
Recommended
Load
Impedance
MONITOR OUT(1/2)
PHONES
10 k ohms or greater
16 ohms or greater
Non Clip
Max Output
Level
MONITOR OUT(1/2)
PHONES
+22 dBu
(1 kHz, 20 k ohms load, typ.)
500 mW + 500 mW
(1 kHz, 40 ohms load, typ.)
Network Latency
REAC A(B) -> REAC C(D)
0.2 mS (typ.)
REAC C(D) -> REAC A(B)
0.2 mS (typ.)
Others
Display 320 x 240 dots TFT color touch screen
Power Supply AC 115 V, AC 117 V,
AC 220 V, AC 230 V, AC 240 V (50/60 Hz)
Power
Consumption
45W
Dimensions 482.0 (W) x
383.6 (D) x
132.5 (H) mm
Weight
7.3 kg / 16 lbs 2 oz
Operation
Temperature
+5 to +40 degrees Celsius
Accessories Power Cord, REAC Connector Cover x 4,
Ferrite Core x 4, Rubber Foot x 4,
Owner's Manual
Options
(sold separately)
Roland HDD-500G (500 GB HDD)
Edirol F1-HD120 (120 GB HDD)
Edirol F1-SSD64 (64 GB HDD)
Connectors
USB
Type A x 1 (for external storage)
Type B x 1 (for computer)
MONITOR
OUT (1/2)
XLR type (balanced) x 2
PHONES Stereo 1/4 inch Phone type x 1
REAC (A - D) RJ-45 EtherCon type x 4
RS-232C 9 pin D-Sub type x 1
MIDI 5 pin DIN type x 2 (IN, OUT/THRU)
VIDEO SYNC
(Black Burst)
BNC type x 2 (IN/THRU)
WORD CLOCK BNC type x 2 (IN/THRU)
BNC type x 1 (LTC)
SMPTE
GPI 1/4 inch Phone type x 1
19 (W) x
15-1/8 (D) x
5-1/4 (H) inches
+41 to +104 degrees Fahrenheit

Roland R-1000 Specifications

General

Brand	Roland
Model	R-1000
Category	Recording Equipment
Language	English